HELIAX HJ9-50 Series 5 inch 50 Ohm Air Dielectric Coaxial Cable

Characteristics Product Line: HELIAX Product Series: HJ9-50 Transmission Line Type: Air Dielectric Coaxial Cable Nominal Impedance: 50 Ohm

ERI is the Broadcast Master Distributor for HELIAX products, system components, and installation accessories.

Features and Benefits

• Low loss dielectric materials combined with high conductivity copper conductors result in low attenuation for efficient signal transfer and maximum system performance.
• Solid copper corrugated outer conductor results in low loss, continuous RFI/EMI shielding to minimize interference and maximize system security. Corrugated outer conductor allows for ease of installation.
• High power handling results from low attenuation and excellent heat transfer characteristics.
• Connectors are designed to be pressure tight for maximum protection against water entry.
• Made with the strongest dielectric spacer in the industry, to withstand the stress of installation.

Specifications

Air Dielectric Coaxial Cable

HJ9-50 Standard coaxial cable, 5-inch, 50 ohm air HELIAX (Wideband from 0.5-960 MHz), price per foot.

HJ9-50-BC 5-inch air HELIAX, optimized for use at broadcast frequencies (54 to 216 MHz , 1.05 VSWR; 470 to 740 MHz, 1.08 VSWR; 740 to 856 MHz; 1.10 VSWR - maximum VSWR over broadcast channel). Specify channel and frequency with order.

Air Dielectric Coaxial Cable System Components

H9MB-602 Connector, 6-1/8 EIA Flange, gas block, includes inner connector for 5 air HELIAX (HJ9-series), brass body and pin with tab flared inner contact and tab flaring outer contact

H9HPMB-602 Connector, 6-1/8 EIA Flange, gas block, includes inner connector for 5-inch high power air HELIAX (HJ9-series), brass body and pin with tab flared inner contact and tab flaring outer contact

H9FB-602 Connector, 6-1/8 EIA Flange, gas block, no inner connector for 5 air HELIAX (HJ9-series), brass body and pin with tab flared inner contact and tab flaring outer contact

H9HPFB-602 Connector, 6-1/8 EIA Flange, gas block, no inner connector for 5-inch high power air HELIAX (HJ9-series), brass body and pin with tab flared inner contact and tab flaring outer contact

H9MP-602 Connector, 6-1/8 EIA Flange, gas pass, includes inner connector for 5 air HELIAX (HJ9-series), brass body and pin with tab flared inner contact and tab flaring outer contact

H9HPMP-602 Connector, 6-1/8 EIA Flange, gas pass, includes inner connector for 5-inch high power air HELIAX (HJ9-series), brass body and pin with tab flared inner contact and tab flaring outer contact

H9FP-602 Connector, 6-1/8 EIA Flange, gas pass, no inner connector for 5 air HELIAX (HJ9-series), brass body and pin with tab flared inner contact and tab flaring outer contact

H9HPFP-602 Connector, 6-1/8 EIA Flange, gas pass, no inner connector for 5-inch high power air HELIAX (HJ9-series), brass body and pin with tab flared inner contact and tab flaring outer contact

79AZ Splice for 5-inch air HELIAX (HJ9-series), brass body and pin with tab flared inner contact and tab flaring outer contact

34767A-55 Connector reattachment kit for HJ9-50 HELIAX connectors H9()-602 and H9HP()-602 includes O-ring and gasket parts

34767A-45 Connector reattachment kit for HJ9HP-50 HELIAX connectors 79AG and 79AR includes O-ring and gasket parts

34767A-31 Connector reattachment kit for HJ9HP-50 HELIAX connectors 79AZ and H9HPZ includes O-ring and gasket parts

Air Dielectric Coaxial Cable Installation Accessories

12395-1 100 Ft. Stainless Steel Wraplock, with fasteners

31771-5 1/2-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-9 3/8-inch threaded rod kit qty. 1 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-4 3/8-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-6 3/8-inch threaded rod kit qty. 5 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-10 3/8-inch threaded rod kit qty. 5 with 36-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

HR41108A 2.5-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.

HR30848-4 1.0-inch standoff adaptor kit for 1 to 3 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.

HR30848-1 1.0-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.

13550 Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 1/2-inch x 1-1/4-inch hanger attachment bolt and nut. For 5-inch HELIAX and for insulated hangers.

8244 Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 3/8-inch x 2-1/4-inch hanger attachment bolt and nut.

43130-1E Round member adapter/tower standoff kit of 10 for mounting 5-inch HELIAX to round support member 3 to 4 inches (75 to 100 mm) in diameter. 2.5-inch (60 mm) standoff, stainless steel.

43130-2E Round member adapter/tower standoff kit of 10 for mounting 5-inch HELIAX to round support member 4 to 5 inches (100 to 125 mm) in diameter. 2.5-inch (60 mm) standoff, stainless steel.

43130-3E Round member adapter/tower standoff kit of 10 for mounting 5-inch HELIAX to round support member 5 to 6 inches (125 to 150 mm) in diameter. 2.5-inch (60 mm) standoff, stainless steel.

31670-4E Round member adaptor kit qty 10 for 4-inch to 5-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-1E Round member adaptor kit qty. 10 for 1-inch to 2-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-2E Round member adaptor kit qty. 10 for 2-inch to 3-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-3E Round member adaptor kit qty. 10 for 3-inch to 4-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-5E Round member adaptor kit qty. 10 for 5-inch to 6-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-6E Round member adaptor kit qty. 10 for 6-inch to 8-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

33981A-1 Angle adapter qty. 10 for 5-inch coaxial cables.

13555A Angle Adapter Single. For insulated hangers. Maximum member thickness 7/8 inches (22 mm). For 1-1/4-inch to 5-inch cable.

40394-2 Wall/roof Feed-Thru, Single Entrance, For 3-inch Cable

40394-1 Wall/roof Feed-Thru, Single Entrance, For 4-inch Cable

33938-5 Wall/roof Feed-Thru, Single Entrance, For 5 inch Cable

244495 connector grounding kit

204989-7 grounding kit, qty. 1, 24-inch cable with 1-hole factory attached lug for 5-inch coaxial HELIAX

207270 crimping tool for grounding kits with crimp-on type lugs

33598-5 Standard hangers qty. 10, for 5-inch coaxial cable. Hangers do not include hardware kit. When attachment means does not include hardware: 5 inch hangers use 1/2 inch hardware 1-1/4 inch long Part Number 31769-4 or HWK0004.

33948-1 Insulated hanger for 5-inch HELIAX, single piece.

HGK0001 Hoisting grip hanger kit to attach HELIAX hoisting grips to tower. Includes 18-inches of chain, 12-inch x 12-inch turnbuckle, and two shackles. One required for each hoisting grip and one hoisting grip required for each 200-feet of vertical run.

31031-1 Hoisting Grip for 5-inch coaxial cables

221213 Connector/Splice weatherproofing kit

245174 Cold Shrink for Type N or 7/16 DIN Connectors

All designs, specifications, and availabilities of products and services presented in this publication are subject to change without notice.