ERI is the Broadcast Master Distributor for HELIAX products, system components, and installation accessories.
3-inch air HELIAX, optimized for use at broadcast frequencies (54 to 216 MHz , 1.05 VSWR; 470 to 740 MHz, 1.08 VSWR; 740 to 856 MHz; 1.10 VSWR - maximum VSWR over broadcast channel). Specify channel and frequency with order.
Standard coaxial cable, 3-inch, 50 ohm air HELIAX (Wideband from 0.5-1640 MHz), price per foot.
Connector, 3-1/8 EIA Flange, gas block, includes inner connector for 3 air HELIAX (HJ8-series), brass body and pin with tab flared inner contact and tab flaring outer contact
Connector, 3-1/8 EIA Flange, gas block, no inner connector for 3-inch air HELIAX (HJ8-series), brass body and pin with tab flared inner contact and tab flaring outer contact
Connector, 3-1/8 EIA Flange, gas pass, includes inner connector for 3-inch air HELIAX (HJ8-series), brass body and pin with tab flared inner contact and tab flaring outer contact
Connector, 3-1/8 EIA Flange, gas pass, no inner connector for 3-inch air HELIAX (HJ8-series), brass body and pin with tab flared inner contact and tab flaring outer contact
Splice for 3-inch air HELIAX (HJ8-series), brass body and pin with tab flared inner contact and tab flaring outer contact
Connector reattachment kit for HJ8-50B HELIAX connector H8()-302 includes O-ring and gasket parts
Connector reattachment kit for HJ8-50B HELIAX connectors 78AGF, 78ARM, 78ARF, 78AGM, and 78AS
100 Ft. Stainless Steel Wraplock, with fasteners
1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 1.5-inch to 3-inch round members. Includes hanger attachment hardware.
1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 3-inch to 4-inch round members. Includes hanger attachment hardware.
1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 4-inch to 5-inch round members. Includes hanger attachment hardware.
1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 5-inch to 6-inch round members. Includes hanger attachment hardware.
2.5-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 3-inch to 4-inch round members. Includes hanger attachment hardware.
2.5-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 4-inch to 5-inch round members. Includes hanger attachment hardware.
2.5-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 5-inch to 6-inch round members. Includes hanger attachment hardware.
3/8-inch threaded rod kit qty. 1 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
3/8-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
3/8-inch threaded rod kit qty. 5 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
3/8-inch threaded rod kit qty. 5 with 36-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
1/2-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
1.0-inch standoff adaptor kit for 1 to 3 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.
1.0-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.
2.5-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.
Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 1/2-inch x 1-1/4-inch hanger attachment bolt and nut. For 5-inch HELIAX and for insulated hangers.
Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 3/8-inch x 2-1/4-inch hanger attachment bolt and nut.
Round member adaptor kit qty 10 for 4-inch to 5-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 1-inch to 2-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 2-inch to 3-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 3-inch to 4-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 5-inch to 6-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 6-inch to 8-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
angle adapter qty. 10 for all waveguides and coaxial cables 1/2-inch to 4-inch
Angle Adapter Single. For insulated hangers. Maximum member thickness 7/8 inches (22 mm). For 1-1/4-inch to 5-inch cable.
Entry Plate, With Eight 4-inch Openings
Entry Plate, With Four 4-inch Openings
Entry Plate, With One 4-inch Opening, 5-inch X 5-inch
Entry Plate, With One 4-inch Opening, 7-inch X 7-inch
Entry Plate, With Sixteen 4-inch Openings
Entry Plate, With Twelve 4-inch Openings
Standard 4 Inch Cable Entry 3-inch Coax, 1 Run
grounding kit, qty. 1, 24-inch cable with 2-hole factory attached lug for 2-1/4-inch and 3-inch coaxial and EW28, EW34, and EW37 waveguide HELIAX
grounding kit, qty. 1, 60-inch cable with 2-hole field attachable crimp-on lug for 2-1/4-inch and 3-inch coaxial and EW28, EW34, and EW37
connector grounding kit
crimping tool for grounding kits with crimp-on type lugs
Standard hangers, qty. 10, 3-inch coaxial and EW28 HELIAX waveguide. Hangers do not include hardware kit. When attachment means does not include hardware: 1/2 to 4 inch hangers use 3/8 inch hardware 3/4 inch long Part Number 31769-5 or HWK0005 or 1 inch long Part Number 31769-1 or HWK0001.
Insulated hanger for 3-inch HELIAX, single piece.
Hoisting grip hanger kit to attach HELIAX hoisting grips to tower. Includes 18-inches of chain, 12-inch x 12-inch turnbuckle, and two shackles. One required for each hoisting grip and one hoisting grip required for each 200-feet of vertical run.
Hoisting Grip for 3-inch coaxial cable and EW28 and EW34 elliptical waveguides
Connector/Splice weatherproofing kit
Cold Shrink for Type N or 7/16 DIN Connectors
All designs, specifications, and availabilities of products and services presented in this publication are subject to change without notice.