Login
HomeCatalogResourcesNewsContactAbout ERI

HELIAX HJ7-50 Series 1 5/8 inch 50 Ohm Air Dielectric Coaxial Cable

Characteristics

Product Line: HELIAX
Product Series: HJ7-50
Transmission Line Type: Air Dielectric Coaxial Cable
Line Size: 1 5/8inch
Nominal Impedance: 50 Ohm

ERI is the Broadcast Master Distributor for HELIAX products, system components, and installation accessories.

Features and Benefits

  • Low loss dielectric materials combined with high conductivity copper conductors result in low attenuation for efficient signal transfer and maximum system performance.
  • Solid copper corrugated outer conductor results in low loss, continuous RFI/EMI shielding to minimize interference and maximize system security. Corrugated outer conductor allows for ease of installation.
  • High power handling results from low attenuation and excellent heat transfer characteristics.
  • Connectors are designed to be pressure tight for maximum protection against water entry.
  • Made with the strongest dielectric spacer in the industry, to withstand the stress of installation.

Specifications


Air Dielectric Coaxial Cable

HJ7-50A-BC

1-5/8-inch air HELIAX, optimized for use at broadcast frequencies (54 to 216 MHz , 1.05 VSWR; 470 to 740 MHz, 1.08 VSWR; 740 to 856 MHz; 1.10 VSWR - maximum VSWR over broadcast channel). Specify channel and frequency with order.

HJ7-50A

Standard coaxial cable, 1-5/8-inch, 50 ohm air HELIAX (Wideband from 0.5-2700 MHz), price per foot.

Air Dielectric Coaxial Cable System Components

87GE

Connector, 1-5/8 EIA Flange, gas block for 1-5/8 air HELIAX (HJ7-series), brass body and silver plated pin with tab flared inner contact and tab flaring outer contact.

87RE

Connector, 1-5/8 EIA Flange, gas pass for 1-5/8 air HELIAX (HJ7-series), brass body and silver plated pin with tab flared inner contact and tab flaring outer contact.

H7MB-014

Connector, 7/8-inch EIA Flange, gas block for 1-5/8-inch air HELIAX (HJ7-series), brass body and silver plated pin with tab flared inner contact and tab flaring outer contact.

H7MP-014

Connector, 7/8-inch EIA Flange, gas pass for 1-5/8-inch air HELIAX (HJ7-series), brass body and silver plated pin with tab flared inner contact and tab flaring outer contact.

H7PDF

Connector, 7-16 DIN Female for 1-5/8-inch air HELIAX (HJ7-series), silver plated body and pin with tab flared inner contact and tab flaring outer contact.

H7PDM

Connector, 7-16 DIN Male for 1-5/8-inch air HELIAX (HJ7-series), silver plated body and pin with tab flared inner contact and tab flaring outer contact.

87Z

Splice for 1-5/8-inch air HELIAX (HJ7-series), brass body and pin with tab flared inner contact and tab flaring outer contact.

34767A-20

Connector reattachment kit for HJ7-50A HELIAX connectors 87SGT and 87ST includes O-ring and gasket parts

34767A-7

Connector reattachment kit for HJ7-50A HELIAX connectors H7PNF, 87PN, 87S and 87SG

34767A-16

Connector reattachment kit for HJ11-50 HELIAX connector 81GF includes O-ring and gasket parts

34767A-13

Connector reattachment kit for HJ7-50A HELIAX connector 87Z includes O-ring and gasket parts

34767A-6

Connector reattachment kit for HJ7-50A HELIAX connectors 87G and 87R includes O-ring and gasket parts

Air Dielectric Coaxial Cable Installation Accessories

12395-1

100 Ft. Stainless Steel Wraplock, with fasteners

30848-4E

1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 1.5-inch to 3-inch round members. Includes hanger attachment hardware.

30848-1E

1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 3-inch to 4-inch round members. Includes hanger attachment hardware.

30848-2E

1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 4-inch to 5-inch round members. Includes hanger attachment hardware.

30848-3E

1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 5-inch to 6-inch round members. Includes hanger attachment hardware.

41108A-1E

2.5-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 3-inch to 4-inch round members. Includes hanger attachment hardware.

41108A-2E

2.5-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 4-inch to 5-inch round members. Includes hanger attachment hardware.

41108A-3E

2.5-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 5-inch to 6-inch round members. Includes hanger attachment hardware.

STS3-12

3-way tower stand off kit to mount 1/2 to 2-1/4 inch Snap-in Hangers, includes round member adaptor, qty. 10 for 0.75-inch to 1.5-inch round members.

STS3-23

3-way tower stand off kit to mount 1/2 to 2-1/4 inch Snap-in Hangers, includes round member adaptor, qty. 10 for 1.5-inch to 3-inch round members.

STS3-45

3-way tower stand off kit to mount 1/2 to 2-1/4 inch Snap-in Hangers, includes round member adaptor, qty. 10 for 4-inch to 5-inch round members.

31771-5

1/2-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-9

3/8-inch threaded rod kit qty. 1 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-4

3/8-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-6

3/8-inch threaded rod kit qty. 5 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-10

3/8-inch threaded rod kit qty. 5 with 36-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

HR41108A

2.5-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.

HR30848-4

1.0-inch standoff adaptor kit for 1 to 3 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.

HR30848-1

1.0-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.

13550

Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 1/2-inch x 1-1/4-inch hanger attachment bolt and nut. For 5-inch HELIAX and for insulated hangers.

8244

Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 3/8-inch x 2-1/4-inch hanger attachment bolt and nut.

31670-4E

Round member adaptor kit qty 10 for 4-inch to 5-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-1E

Round member adaptor kit qty. 10 for 1-inch to 2-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-2E

Round member adaptor kit qty. 10 for 2-inch to 3-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-3E

Round member adaptor kit qty. 10 for 3-inch to 4-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-5E

Round member adaptor kit qty. 10 for 5-inch to 6-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-6E

Round member adaptor kit qty. 10 for 6-inch to 8-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31768A

angle adapter qty. 10 for all waveguides and coaxial cables 1/2-inch to 4-inch

13555A

Angle Adapter Single. For insulated hangers. Maximum member thickness 7/8 inches (22 mm). For 1-1/4-inch to 5-inch cable.

SCE-158

Wall/roof Feed-Thru, Single Entrance, For 1-5/8 Cable

204673-8

Entry Plate, With Eight 4-inch Openings

204673-4

Entry Plate, With Four 4-inch Openings

204673-2

Entry Plate, With One 4-inch Opening, 5-inch X 5-inch

204673-1

Entry Plate, With One 4-inch Opening, 7-inch X 7-inch

204673-16

Entry Plate, With Sixteen 4-inch Openings

204673-12

Entry Plate, With Twelve 4-inch Openings

SEC-1158

SnapSeal™ Entry Cushion with 1 hole for 1-5/8 in corrugated coaxial cable

241088-4

grounding kit, qty. 1, 24-inch cable with 2-hole factory attached lug for 1-5/8-inch coaxial and EW44, EW52, and EW63 waveguide HELIAX

220498

grounding kit, qty. 1, 60-inch cable with 2-hole field attachable crimp-on lug for 1-5/8-inch coaxial HELIAX, EW52, and EW63

244495

connector grounding kit

207270

crimping tool for grounding kits with crimp-on type lugs

SSH-158

SnapStak hanger, qty. 10, for 1-5/8-inch coaxial HELIAX

42396A-2

Standard hangers, qty. 10, for 1-5/8-inch coaxial and EW44 waveguide HELIAX. Hangers do not include hardware kit. When attachment means does not include hardware: 1/2 to 4 inch hangers use 3/8 inch hardware 3/4 inch long Part Number 31769-5 or HWK0005 or 1 inch long Part Number 31769-1 or HWK0001.

33948-3

Insulated hanger for 1-5/8-inch HELIAX, single piece.

HGK0001

Hoisting grip hanger kit to attach HELIAX hoisting grips to tower. Includes 18-inches of chain, 12-inch x 12-inch turnbuckle, and two shackles. One required for each hoisting grip and one hoisting grip required for each 200-feet of vertical run.

24312A

Hoisting Grip for 1-5/8-inch coaxial cable and EW44, EW52, and EW63 elliptical waveguides

221213

Connector/Splice weatherproofing kit

245172

Cold Shrink for 1 1/4-inch OR 1 5/8-inch to 3/8-inch or 1/2-inch

245174

Cold Shrink for Type N or 7/16 DIN Connectors

All designs, specifications, and availabilities of products and services presented in this publication are subject to change without notice.

Pages on this site may require Adobe Reader. You can download this free software here.
Copyright © 2014 Electronics Research, Inc. All rights reserved.