Login
HomeCatalogResourcesNewsContactAbout ERI

HELIAX AVA7-50 Series 1 5/8 inch 50 Ohm Foam Dielectric Coaxial Cable

Characteristics

Product Line: HELIAX
Product Series: AVA7-50
Transmission Line Type: Foam Dielectric Coaxial Cable
Line Size: 1 5/8inch
Nominal Impedance: 50 Ohm

ERI is the Broadcast Master Distributor for HELIAX products, system components, and installation accessories.

HELIAX AVA7-50 from Andrew Corporation is the lowest attenuation coaxial cable in the industry.

With HELIAX AVA7-50, system designers and operators can cut cable subsystem costs by up to 38% and gain tower height at the same time. Engineers can now meet system link budgets using HELIAX AVA7-50 1-5/8” coaxial cable in site applications that would normally require 2-1/4” cable. In addition, it can be used in typical 1-5/8” applications with the benefit of lower system loss.

Manufactured worldwide, HELIAX AVA7-50 cables can be at your site quickly via our global distribution network. Or simply order an Andrew OnePackSM Site Kit with AVA7-50 for even faster, more consistent site buildouts.

Specifications


Foam Dielectric Coaxial Cable

AVA7-50

Low Loss 1-5/8-inch Flexible HELIAX Coaxial Cable, 0.5-2500 MHz, price per foot.

Foam Dielectric Coaxial Cable System Components

AL7E78-PS

7/8-inch EIA Positive Stop Connector for AVA7-50 HELIAX®

AL7DF-PSA

7-16 DIN Female Positive Stop for 1-5/8-inch AVA7-50 HELIAX®

AL7DM-PSA

7-16 DIN Male Positive Stop for 1-5/8-inch AVA7-50 HELIAX®

AL7E158-PS

1-5/8-inch EIA Positive Stop Connector for AVA7-50 HELIAX®

AL7NF-PSA

N Female Positive Stop for 1-5/8-inch AVA7-50 HELIAX®

AL7NM-PSA

N Male Positive Stop for 1-5/8-inch AVA7-50 HELIAX®

Foam Dielectric Coaxial Cable Installation Accessories

12395-1

100 Ft. Stainless Steel Wraplock, with fasteners

30848-4E

1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 1.5-inch to 3-inch round members. Includes hanger attachment hardware.

30848-1E

1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 3-inch to 4-inch round members. Includes hanger attachment hardware.

30848-2E

1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 4-inch to 5-inch round members. Includes hanger attachment hardware.

30848-3E

1-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 5-inch to 6-inch round members. Includes hanger attachment hardware.

41108A-1E

2.5-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 3-inch to 4-inch round members. Includes hanger attachment hardware.

41108A-2E

2.5-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 4-inch to 5-inch round members. Includes hanger attachment hardware.

41108A-3E

2.5-inch tower stand off kit to mount 1/2 to 4 inch cable hangers, includes round member adaptor, qty. 10 for 5-inch to 6-inch round members. Includes hanger attachment hardware.

STS3-12

3-way tower stand off kit to mount 1/2 to 2-1/4 inch Snap-in Hangers, includes round member adaptor, qty. 10 for 0.75-inch to 1.5-inch round members.

STS3-23

3-way tower stand off kit to mount 1/2 to 2-1/4 inch Snap-in Hangers, includes round member adaptor, qty. 10 for 1.5-inch to 3-inch round members.

STS3-45

3-way tower stand off kit to mount 1/2 to 2-1/4 inch Snap-in Hangers, includes round member adaptor, qty. 10 for 4-inch to 5-inch round members.

31771-5

1/2-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-9

3/8-inch threaded rod kit qty. 1 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-4

3/8-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-6

3/8-inch threaded rod kit qty. 5 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

31771-10

3/8-inch threaded rod kit qty. 5 with 36-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX

HR41108A

2.5-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.

HR30848-4

1.0-inch standoff adaptor kit for 1 to 3 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.

HR30848-1

1.0-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.

13550

Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 1/2-inch x 1-1/4-inch hanger attachment bolt and nut. For 5-inch HELIAX and for insulated hangers.

8244

Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 3/8-inch x 2-1/4-inch hanger attachment bolt and nut.

31670-4E

Round member adaptor kit qty 10 for 4-inch to 5-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-1E

Round member adaptor kit qty. 10 for 1-inch to 2-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-2E

Round member adaptor kit qty. 10 for 2-inch to 3-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-3E

Round member adaptor kit qty. 10 for 3-inch to 4-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-5E

Round member adaptor kit qty. 10 for 5-inch to 6-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31670-6E

Round member adaptor kit qty. 10 for 6-inch to 8-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.

31768A

angle adapter qty. 10 for all waveguides and coaxial cables 1/2-inch to 4-inch

13555A

Angle Adapter Single. For insulated hangers. Maximum member thickness 7/8 inches (22 mm). For 1-1/4-inch to 5-inch cable.

SCE-158

Wall/roof Feed-Thru, Single Entrance, For 1-5/8 Cable

204673-8

Entry Plate, With Eight 4-inch Openings

204673-4

Entry Plate, With Four 4-inch Openings

204673-2

Entry Plate, With One 4-inch Opening, 5-inch X 5-inch

204673-1

Entry Plate, With One 4-inch Opening, 7-inch X 7-inch

204673-16

Entry Plate, With Sixteen 4-inch Openings

204673-12

Entry Plate, With Twelve 4-inch Openings

SEC-1158

SnapSeal™ Entry Cushion with 1 hole for 1-5/8 in corrugated coaxial cable

241088-4

grounding kit, qty. 1, 24-inch cable with 2-hole factory attached lug for 1-5/8-inch coaxial and EW44, EW52, and EW63 waveguide HELIAX

220498

grounding kit, qty. 1, 60-inch cable with 2-hole field attachable crimp-on lug for 1-5/8-inch coaxial HELIAX, EW52, and EW63

244495

connector grounding kit

207270

crimping tool for grounding kits with crimp-on type lugs

SSH-158

SnapStak hanger, qty. 10, for 1-5/8-inch coaxial HELIAX

42396A-2

Standard hangers, qty. 10, for 1-5/8-inch coaxial and EW44 waveguide HELIAX. Hangers do not include hardware kit. When attachment means does not include hardware: 1/2 to 4 inch hangers use 3/8 inch hardware 3/4 inch long Part Number 31769-5 or HWK0005 or 1 inch long Part Number 31769-1 or HWK0001.

33948-3

Insulated hanger for 1-5/8-inch HELIAX, single piece.

HGK0001

Hoisting grip hanger kit to attach HELIAX hoisting grips to tower. Includes 18-inches of chain, 12-inch x 12-inch turnbuckle, and two shackles. One required for each hoisting grip and one hoisting grip required for each 200-feet of vertical run.

24312A

Hoisting Grip for 1-5/8-inch coaxial cable and EW44, EW52, and EW63 elliptical waveguides

221213

Connector/Splice weatherproofing kit

245172

Cold Shrink for 1 1/4-inch OR 1 5/8-inch to 3/8-inch or 1/2-inch

245174

Cold Shrink for Type N or 7/16 DIN Connectors

All designs, specifications, and availabilities of products and services presented in this publication are subject to change without notice.

Pages on this site may require Adobe Reader. You can download this free software here.
Copyright © 2013 Electronics Research, Inc. All rights reserved.