Standard rigid coaxial line is manufactured to the same high standards as other MACXLine, however no mechanism to compensate for thermal expansion is included. StandardLine is intended for indoor applications and use in short runs where bellows are not neccesary.
Rigid Line Components and Accessories Rigid Coaxial Line System Components and Installation Accessories Brochure > Download File
Topics Include:
(Type: Brochure; Publication Number: 20090318017_AEN; Language Code: EN; Revision: 01)
Standard Line STD775 Series 7 3/16 inch 75 Ohm Rigid Coaxial Line Brochure > Download File
(Type: Brochure; Publication Number: 20090318022_AEN; Language Code: EN; Revision: 01)
7-3/16 inch, 75 ohm 19 foot standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit.
7-3/16 inch, 75 ohm 19.5 foot standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit.
7-3/16 inch, 75 ohm 19.75 foot standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit.
7-3/16 inch, 75 ohm 20 foot standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit.
7-3/16 inch, 75 ohm standard line field cut for sections up to 20-feet supplied with captivated inner connector, swivel field flange kit, and flange hardware kit.
7-3/16-inch, 75 ohm customer specified length, from 120-inches to 240-inches, standard section flanged both ends, supplied with captivated inner connector, and flange hardware kit. *Specify flange to flange length of outer conductor in inches (two decimal placesin inches.)
7-3/16-inch, 75 ohm customer specified length, from 60-inches to 120-inches, standard section flanged both ends, supplied with captivated inner connector, and flange hardware kit. *Specify flange to flange length of outer conductor in inches (two decimal placesin inches.)
Reducer, 75 ohm, 7-3/16 inch to 6-1/8-inch, includes 6-1/8-inch inner connector and flange hardware kit.
Reducer, 75 ohm, 8-3/16-inch to 7-3/16-inch, includes 7-3/16-inch inner connector and flange hardware kit.
7-3/16 inch, 75 ohm, male-to-male adapter, no inner connectors, includes hardware kit, 8 inch length.
7-3/16 inch, 75 ohm, 45 degree Elbow, includes inner connector, O-ring, silicone grease, and flange hardware kit. *Specify television channel, FM, or frequency range.
8-3/16-inch, 75 ohm, 90 degree elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit. *Specify television channel, FM, or frequency range
7-3/16 inch, 75 ohm, 90 degree, UHF Wide Band Elbow, includes inner connector, O-ring, silicone grease, and flange hardware kit. *Specify television channel, FM, or frequency range.
7-3/16 inch end cap to seal line.
7-3/16 inch soft solder swivel field flange for interior runs, includes soft solder swivel flange and sleeve with fixed ring. Order flange hardware kit and inner connector separately.
7-3/16 inch silver solder swivel flange, includes silver solder, flux, sliding ring, and fixed ring. Order flange hardware kit and inner connector separately.
7-3/16 inch silver solder fixed field flange, includes silver solder and flux. Order flange hardware kit and inner connector separately.
7-3/16 inch, 75 ohm, UHF fine matcher, flanged both ends. Includes one captivated inner connector and flange hardware kit. 7 tuners.
7-3/16-inch, 75 ohm, fine matcher field retrofit kit, includes four tuners for installation in customer supplied line section.
7-3/16 inch, 75 ohm, heavy duty gas barrier, both sides have a pressure port, fixed male inner connectors both ends.
7-3/16 inch, 75 ohm standard inner connector.
7-3/16 inch, 75 ohm captivated inner connector.
7-3/16 inch O-ring gasket.
7-3/16 inch Wall Feed Thru, includes split mounting plate. Uses 3/8-inch mounting hardware (not supplied).
7-3/16 inch hardware kit, includes O-ring, silicone lubricant, nuts, bolts, and lock washers for one flange joint.
7-3/16 inch, Horizontal Spring Hanger, 3 point attachment. Accommodates vertical movement in the horizontal run caused by differential expansion and contraction of the vertical run. Use at 10 foot intervals.
7-3/16 inch Rigid Horizontal Hanger, 2 point attachment. Restricts lateral and vertical movement while permitting longitudinal movement due to thermal expansion. Use at 10 foot intervals.
7-3/16 inch, Rigid Horizontal Hanger, 1 point attachment. Restricts lateral and vertical movement while permitting longitudinal movement due to thermal expansion. Use at 10 foot intervals. Has no lateral restraint: order RLA800-14 separately.
7-3/16 inch, Horizontal Spring Hanger, 1 point attachment. Accommodates vertical movement in the horizontal run caused by differential expansion and contraction of the vertical run. Use at 10 foot intervals. Has no lateral restraint: order RLA700-14 separately.
7-3/16-inch horizontal slip hanger for indoor use, stud mounted.
7-3/16 inch Lateral Brace, use near bottom of vertical run to restrict lateral motion of line while permitting vertical and horizontal movement. Mount: Attach through single 7/16 inch diameter hole
Replacement button kit for RLA300-11H, RLA400-11H, RLA600-11H, RLA700-11H, and RLA800-11H. Includes ten (10) replacement buttons per kit.
7-3/16 inch Rigid Hanger, use one for up to 1000 feet of line and one for each additional 1000 feet of line. Mounting hardware included: 5/8-inch diameter hardware for mounting to 11/16 inch diameter holes.
7-3/16 hinged Vertical Spring Hanger, supports the transmission line, prevents lateral motion, and accommodates differential expansion and contraction. Use at 10 foot intervals. Hinged to open from left or right side to save installation labor. Includes 5/8-inch mounting hardware.
All designs, specifications, and availabilities of products and services presented in this publication are subject to change without notice.