Standard rigid coaxial line is manufactured to the same high standards as other MACXLine, however no mechanism to compensate for thermal expansion is included. StandardLine is intended for indoor applications and use in short runs where bellows are not neccesary.
Rigid Line Components and Accessories Rigid Coaxial Line System Components and Installation Accessories Brochure > Download File
Topics Include:
(Type: Brochure; Publication Number: 20090318017_AEN; Language Code: EN; Revision: 01)
Standard Line STD350 Series 3 1/8 inch 50 Ohm Rigid Coaxial Line Brochure > Download File
(Type: Brochure; Publication Number: 20090318019_AEN; Language Code: EN; Revision: 01)
3-1/8-inch, 50 ohm 17.5 foot standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit.
3-1/8-inch, 50 ohm 19 foot standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit.
3-1/8-inch, 50 ohm 19.5 foot standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit.
3-1/8-inch, 50 ohm 19.75 foot standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit.
3-1/8-inch, 50 ohm 20 foot standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit.
3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.
3-1/8-inch, 50 ohm standard line field cut for sections up to 20-feet supplied with captivated inner connector, fixed field flange kit, and flange hardware kit.
3-1/8-inch, 50 ohm customer specified length, from 120-inches to 240-inches, standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit. *Specify flange to flange length of outer conductor in inches (two decimal placesin inches.)
3-1/8-inch, 50 ohm customer specified length, from 120-inches to 240-inches, Standard line section Flanged one end. Includes captivated inner connector and one hardware kit. *Specify flange to end length of outer conductor in inches (two decimal placesin inches.)
3-1/8-inch, 50 ohm customer specified length, from 120-inches to 240-inches, unflanged line section. *Specify end to end length of outer conductor in inches (two decimal placesin inches.)
3-1/8-inch, 50 ohm customer specified length, from 60-inches to 120-inches, standard line section flanged both ends, supplied with captivated inner connector, and flange hardware kit. *Specify flange to flange length of outer conductor in inches (two decimal placesin inches.)
3-1/8-inch, 50 ohm customer specified length, from 60-inches to 120-inches, Standard line section Flanged one end. Includes captivated inner connector and one hardware kit. *Specify flange to end length of outer conductor in inches (two decimal placesin inches.)
3-1/8-inch, 50 ohm customer specified length, from 60-inches to 120-inches, unflanged line section. *Specify end to end length of outer conductor in inches (two decimal placesin inches.)
3-1/8-inch, 50 ohm customer specified length, up to 60-inches, Standard line section Flanged one end. Includes captivated inner connector and one hardware kit. *Specify flange to end length of outer conductor in inches (two decimal placesin inches.)
3-1/8-inch, 50 ohm customer specified length, up to 60-inches, unflanged line section. *Specify end to end length of outer conductor in inches (two decimal placesin inches.)
Plate reducer, 50 ohm, 3-1/8-inch to 1-5/8-inch includes two inner connectors. 1-5/8-inch bullet is removable and mates with captivated 1-5/8-inch inner connectors. Formerly Part Number 1861.
Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.
Reducer, 50 ohm, 4-1/16 inch to 3-1/8-inch, includes 3-1/8-inch inner connector and 3-1/8-inch flange hardware kit.
3-1/8-inch, 50 ohm, male-to-male adapter, no inner connectors, includes hardware kit, 6-inch length. Formerly Part Number: 23187
3-1/8-inch adapter inner connector, 50-51.5 ohm. Formerly part number 4852.
3-1/8-inch, 50 ohm, galvanic barrier, aluminum outer conductor. Used when interfacing outdoors to brass/ copper transmission line or connectors. Includes one captive inner connector and flange hardware kit. 6-inch length, flange to flange.
3-1/8-inch, 50 ohm, 90 degree miter elbow, unflanged (no inner connector).
3-1/8-inch, 50 ohm, 45 degree miter elbow, unflanged (no inner connector).
3-1/8-inch, 50 ohm, 90 degree miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Not reinforced.
3-1/8-inch, 50 ohm, 90 degree miter elbow, flanged one leg captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.
3-1/8-inch, 50 ohm, 90 degree miter elbow, unequal legs, 5-inch x 17 inch, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.
3-1/8-inch, 50 ohm, 90 degree miter elbow, unequal legs, 6-inch x 9 inch, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.
3-1/8-inch, 50 ohm, 90 degree reinforced miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.
3-1/8-inch, 50 ohm, 45 degree miter elbow, flanged one leg captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.
3-1/8-inch, 50 ohm, 45 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Formerly Part Number: 1162.
3-1/8-inch end cap to seal line.
3-1/8-inch soft solder swivel field flange for interior runs, includes soft solder swivel flange and sleeve with fixed ring. Order flange hardware kit and inner connector separately.
3-1/8-inch silver solder swivel flange, includes silver solder, flux, sliding ring, and fixed ring. Order flange hardware kit and inner connector separately. Replaces Part Number 18200.
3-1/8-inch silver solder fixed field flange, includes silver solder and flux. Order flange hardware kit and inner connector separately. Replaces Part Number 15840.
3-1/8-inch flange adapter, clamp type. Order flange hardware kit and inner connector separately.
3-1/8-inch, 50 ohm, High Band VHF fine matcher, flanged both ends. Includes one inner connector, O ring, and flange hardware kit. 5 tuners. Can be pressurized for outside use. 48-inches flange to flange.
3-1/8-inch, 50 ohm, UHF fine matcher, flanged both ends. Includes one inner connector and flange hardware kit. 7 tuners. Can be pressurized for outside use.
3-1/8-inch, 50 ohm, heavy duty gas barrier, both sides have a pressure port, fixed male inner connectors both ends.
3-1/8-inch, 50 ohm, 17.5 foot inner conductor, supplied with captivated inner connector and flange hardware kit.
3-1/8-inch, 50 ohm, 19.5 foot inner conductor, supplied with captivated inner connector and flange hardware kit.
3-1/8-inch, 50 ohm, 19.75 foot inner conductor, supplied with captivated inner connector and flange hardware kit.
3-1/8-inch, 50 ohm, 20-foot inner conductor, standard captivated inner connector, and flange hardware kit.
3-1/8-inch, 50 ohm, variable length inner conductor, standard captivated inner connector, and flange hardware kit. *Specify flange to flange length of outer conductor in inches (two decimal placesin inches.)
3-1/8-inch unsupported inner conductor.
3-1/8-inch, 50 ohm standard inner connector.
3-1/8-inch, 50 ohm captivated inner connector.
3-1/8-inch "O" ring gasket, replaces 10683-405.
3-1/8-inch, 50 ohm, unpressurized coupling, connects unflanged line and fittings. Includes supported inner connector and sleeve outer connector with clamps.
Universal Rigid Line Bracket for 3-1/8-inch, 4-1/16-inch, 6-1/8-inch, 7-3/16-inch, 8-3/16-inch, and 9-3/16-inch rigid transmission lines. Includes 5/8-inch hardware to attach to drilled or punched horizontal angle members.
Universal Rigid Line Bracket for 3-1/8-inch, 4-1/16-inch, and 6-1/8-inch rigid transmission lines. Includes round member adaptors to attach to horizontal tower members from 0.75 to 3-inches.
Universal Rigid Line Bracket for 3-1/8-inch, 4-1/16-inch, and 6-1/8-inch rigid transmission lines. Includes round member adaptors to attach to vertical tower members from 1.25 to 2-inches.
Universal Rigid Line Bracket for 3-1/8-inch, 4-1/16-inch, and 6-1/8-inch rigid transmission lines. Includes round member adaptors to attach to vertical tower members from 2.25 to 3-inches.
3-1/8-inch Wall Feed Thru, includes split mounting plate. Uses 3/8-inch mounting hardware (not supplied).
3-1/8-inch hardware kit, includes O-ring, silicone lubricant, nuts, bolts, and lock washers for one flange joint. Formerly Part Number: 69226-2
3-1/8-inch, single, 3-point horizontal suspension hanger. Accommodates vertical movement in the horizontal run caused by differential expansion and contraction of the vertical run. Use at 10 foot intervals.
3-1/8 inch Rigid Horizontal Hanger, 2 point attachment. Restricts lateral and vertical movement while permitting longitudinal movement due to thermal expansion. Use at 10 foot intervals.
3-1/8 inch, Rigid Horizontal Hanger, 1 point attachment. Restricts lateral and vertical movement while permitting longitudinal movement due to thermal expansion. Use at 10 foot intervals. Has no lateral restraint: order RLA300-14 separately.
3-1/8-inch, single, single-point horizontal suspension hanger. Accommodates vertical movement in the horizontal run caused by differential expansion and contraction of the vertical run. Use at 10 foot intervals. Has no lateral restraint: order RLA300-14 separately.
3-1/8-inch horizontal slip hanger for indoor use, stud mounted.
3-1/8-inch horizontal slip hanger.
3-1/8-inch lateral brace, use one near bottom to restrict lateral motion of line while permitting vertical and horizontal movement. Mount: Attach through single 7/16-inch diameter hole.
Replacement button kit for RLA300-11H, RLA400-11H, RLA600-11H, RLA700-11H, and RLA800-11H. Includes ten (10) replacement buttons per kit.
3-1/8-inch rigid hanger, use one for up to 300 feet of line and one for each additional 300 feet of line. Mounting hardware included: 1/2-inch diameter hardware for mounting to 9/16-inch diameter hole.
3-1/8 hinged vertical spring hanger, supports the transmission line, prevents lateral motion, and accommodates differential expansion and contraction. Use at 10 foot intervals. Hinged to open from left or right side to save installation labor. Includes 1/2-inch mounting hardware.
All designs, specifications, and availabilities of products and services presented in this publication are subject to change without notice.