ERI is the Broadcast Master Distributor for HELIAX products, system components, and installation accessories.
HELIAX elliptical waveguide is the optimum choice for most microwave antenna feeder systems. HELIAX is precisionformed from corrugated high-conductivity copper and has an elliptical cross section. The corrugated wall gives the waveguide excellent crush strength, light weight and good flexibility for ease of handling. A rugged black polyethylene jacket provides protection during handling and installation. A full range of waveguide sizes is available for application from 1.7 to 26.5 GHz.
Standard elliptical waveguide, EW127A, (Wideband from 11.7-13.25 GHz)
Connector, fixed tuned, mates with PBR120 for EW127A and EWP127A
Connector, fixed tuned, mates with PDR120 for EW127A and EWP127A
Connector, fixed tuned, mates with WR75 for EW127A and EWP127A
Splice kit for EW127A and EWP127A HELIAX waveguide
Connector reattachment kit for EW127A and EWP127A HELIAX elliptical waveguide includes rubber gasket parts
100 Ft. Stainless Steel Wraplock, with fasteners
3-way tower stand off kit to mount 1/2 to 2-1/4 inch Snap-in Hangers, includes round member adaptor, qty. 10 for 0.75-inch to 1.5-inch round members.
3-way tower stand off kit to mount 1/2 to 2-1/4 inch Snap-in Hangers, includes round member adaptor, qty. 10 for 1.5-inch to 3-inch round members.
3-way tower stand off kit to mount 1/2 to 2-1/4 inch Snap-in Hangers, includes round member adaptor, qty. 10 for 4-inch to 5-inch round members.
3/8-inch threaded rod kit qty. 1 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
3/8-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
3/8-inch threaded rod kit qty. 5 with 24-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
3/8-inch threaded rod kit qty. 5 with 36-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
1/2-inch threaded rod kit qty. 5 with 12-inch rod ceiling mounting plate nuts/washers for use with EWG or COAX
1.0-inch standoff adaptor kit for 1 to 3 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.
1.0-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.
2.5-inch standoff adaptor kit for 3 to 6 inch leg, quantity of 10 per kit. Includes hardware to attach non-insulated butterfly hanger. Requires ERI part number 31670-() round member adaptor kit, one per kit.
Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 1/2-inch x 1-1/4-inch hanger attachment bolt and nut. For 5-inch HELIAX and for insulated hangers.
Round member adapter for attaching hangers to round tower members up to 3 inches diameter, includes 3/8-inch x 2-1/4-inch hanger attachment bolt and nut.
Round member adaptor kit qty 10 for 4-inch to 5-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 1-inch to 2-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 2-inch to 3-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 3-inch to 4-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 5-inch to 6-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
Round member adaptor kit qty. 10 for 6-inch to 8-inch round members. Stainless steel clamps to mount 1/2 to 4 inch cable hangers to round support members. Two each are needed for 3 and 4 inch cable hangers.
angle adapter qty. 10 for all waveguides and coaxial cables 1/2-inch to 4-inch
Angle Adapter Single. For insulated hangers. Maximum member thickness 7/8 inches (22 mm). For 1-1/4-inch to 5-inch cable.
single wall/roof feed-thru assembly for EW127A, EWP127A
Entry Plate, With Eight 4-inch Openings
Entry Plate, With Four 4-inch Openings
Entry Plate, With One 4-inch Opening, 5-inch X 5-inch
Entry Plate, With One 4-inch Opening, 7-inch X 7-inch
Entry Plate, With Sixteen 4-inch Openings
Entry Plate, With Twelve 4-inch Openings
grounding kit, qty. 1, 24-inch cable with 2-hole factory attached lug for 7/8-inch coaxial and EW85, EW90, EW127A, and EW132 waveguide HELIAX
grounding kit, qty. 1, 36-inch cable with 2-hole field attachable crimp-on lug for 7/8-inch coaxial and EW85, EW90, EW127A, and EW132 waveguide HELIAX
connector grounding kit
crimping tool for grounding kits with crimp-on type lugs
Standard hangers, qty. 10, for 5/8-inch coaxial and EW127A and EW132 waveguide HELIAX. Hangers do not include hardware kit. When attachment means does not include hardware: 1/2 to 4 inch hangers and EW17 to EW240 use 3/8 inch hardware 3/4 inch long Part Number 31769-5 or HWK0005 or 1 inch long Part Number 31769-1 or HWK0001.
Snap-in hanger, qty. 10, for EW127A waveguide
Hoisting Grip for EW85, EW90, EW127A, and EW132 elliptical waveguides
Hoisting grip hanger kit to attach HELIAX hoisting grips to tower. Includes 18-inches of chain, 12-inch x 12-inch turnbuckle, and two shackles. One required for each hoisting grip and one hoisting grip required for each 200-feet of vertical run.
Connector/Splice weatherproofing kit
Cold Shrink for Type N or 7/16 DIN Connectors
All designs, specifications, and availabilities of products and services presented in this publication are subject to change without notice.